HEADLIGHT POLYMER KIT

HEADLIGHT POLYMER KIT

90.00 €

Restore the Shine of Your Headlights

Our professional headlight restoration polymer kit is an innovative solution designed to recover and renew the lost shine on your vehicle’s headlights through the use of liquid polymer.

Category:

Description

HEADLIGHT POLYMER KIT
Professional Headlight Restoration Kit

Our professional headlight restoration polymer kit is an innovative solution designed to recover and renew the lost shine on your vehicle’s headlights using a liquid polymer.

This kit has been carefully developed to offer an effective and professional restoration. The liquid polymer vaporization restores the original clarity and brilliance of the headlights, significantly improving your vehicle’s visibility and overall aesthetics.

Benefits of the Headlight Polymer Kit

  • Professional Restoration: Eliminates headlight opacity and wear.
  • Shine Renewal: Restores the original clarity and look of the headlights.
  • Improved Visibility: Ensures safe driving with sharp, bright headlights.

Trust our Headlight Restoration Polymer Kit to professionally and effectively recover the quality and appearance of your headlights.

KIT CONTENTS

  • 1 Vaporizer (Heating Cup)
  • 1 Charger (Power Adapter)
  • 1 Application Funnel
  • 1 Face Mask
  • 1 Headlight Renewal Polymer (600 ml)
  • 1 Manual Sanding Block
DIRECTIONS FOR USE
Preparation
  1. Thoroughly clean the headlight beforehand and dry it with a clean towel.
  2. Use masking tape to protect the painted edges of the vehicle body around the headlight.
  3. Gradually wet-sand the headlight with the different sandpaper grits provided until the yellowish varnish layer is completely removed.
  4. Clean the headlight again and ensure the surface is uniformly sanded.
  5. Put on the face mask and protective gloves.
Application

 

  1. Fill the vaporizer cup halfway with the headlight polymer and cover it with the lid.
  2. Connect the charger and heat the cup for 5-6 minutes until vapor is released. Do not leave the vaporizer connected for more than 20 minutes.
  3. Vaporize the surface from a distance of 1 cm, applying from the base to the top of the headlight until the surface becomes shiny.
  4. Ensure the tube nozzle is facing upward to prevent the vapor from condensing into water droplets.
  5. Keep your face at least 40 cm away from the tube nozzle.
Finishing
  1. Turn off the device after use. Allow a 10-minute curing time.
  2. Wait 5 minutes for the vaporizer to cool, then pour any remaining liquid back into the polymer bottle.

Related products